EUCHNER CES-I-AP-M-C04 (Multicode) - Manual (Page 2)

Operating Instructions Safety Switch CES-I-AP-M-C04
2
Contents
About this document 3
Correct use 3
Possible combinations for CES components 4
Exclusion of liability and warranty 4
General safety instructions 5
Function 6
Mounting 8
Electrical connection 9
Particularities for operation on decentralized peripheral systems 11
Safety in case of faults 11
Fuse protection for power supply 11
Requirements for connection cables 12
Connector assignment and wire color for safety switch CES-I-AP-M-C04 13
Connecting a CES-I-AP-...-SI-... (pin 5 not assigned) to a decentralized peripheral system
(e.g. ET200pro series from Siemens) 15
Setup 16
LED indicators
16
Initial setup 16
Functional check 17
System status table 18
Technical data 19
Technical data for safety switch CES-I-AP-M-C04 19
Technical data for actuator CES-A-BBN-C04 21
Technical data for actuator CES-A-BDN-06 23
Ordering information and accessories 24
Inspection and service 24
Service 24
Declaration of conformity 25