EUCHNER CES-AP-CL2-AH (Unicode) - Manual (Page 2)

Operating Instructions Safety System CES-AP-C.2-AH
2
Contents
About this document 3
Correct use 3
Possible combinations for CES components 4
Exclusion of liability and warranty 4
General safety instructions 5
Function 6
Mounting 8
Electrical connection 9
Notes for operation with safe control systems 10
Devices for direct connection to IP65 field modules 10
Safety in case of faults 11
Fuse protection for power supply 11
Requirements for connection cables 11
Connector assignment and wire color for safety switch CES-AP-C.2-AH 12
Connection 13
Connecting a CES-AP-...-SB-... (pin 5 not assigned) to a decentralized peripheral system
(e.g. ET200pro series from Siemens) 14
Setup 15
LED indicators 15
Teach-in function for actuator 15
Functional check 16
System status table 17
Technical data 18
Technical data for safety switch CES-AP-CR2-AH/CES-AP-CL2-AH 18
Technical data for actuator CES-A-BLN-... 20
Technical data for actuator CES-A-BDN 22
Ordering information and accessories 23
Inspection and service 24
Service 24
Declaration of conformity 25