ETC Source Four CE Zoom - Manual (Page 5)

3
English
Basic assembly
Luminaire information
Wiring and power information
A plug of at least 2.5 amp (220/240V) rating should be attached to the luminaire’s mains lead. The
wires in the mains lead are 1.55mm
2
each and coloured in accordance with the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
Current rating: 120V/5 amp maximum
240V/2.5 amp maximum
Operating frequency: 50/60 Hz
W A R N I N G : Please note the following safety warnings before use:
Do not mount the luminaire on or near combustible surfaces.
Do not operate the luminaire without a lens installed.
Always hang the luminaire with the color frame retaining clip in the locked
position.
Remove cardboard insert from lens tube before connecting power to your
fixture.
W A R N I N G : This luminaire must be earthed.
Figure 1
Lamp housing
Insulated handle
Reflector housing
Yoke
Pattern holder slot
Drop-in iris slot
Shutters
Color frame
Barrel
25°-50° lens tube
Barrel rotation knob
Focus dial
Color frame
retaining gel clip
15°-30° lens tube
Optional
Balancing yoke
Retainer bolt
Yoke locking knob
t 180°c