ETC Source Four Fresnel User Manual

Page 9

Text mode
Original mode

Lamp Information

Step 8:

Push down on the lamp base until the lamp seats firmly. When properly installed, the top
of the lamp’s base will be even with the top edges of the retention brackets.

Step 9:

Reinstall the lamp holder assembly into its socket in the fixture so that the arrow points

towards the “unlock” icon on the socket.

Step 10: Turn the lamp holder assembly clockwise one-quarter turn so that the arrow points to the

“lock” icon.

Step 11: Turn the knurled knob clockwise to secure the lamp holder assembly.
Step 12: Close the lamp housing door and turn the latch to secure the door.

C A U T I O N :

Improperly installed lamps and lamp holder assemblies cause premature lamp

failure and socket problems.