ETC Selador Series CE - Manual (Page 21)

16
Cooling Fan Filter Cleaning
 Cooling fan filters should be inspected at a minimum every six months; more frequently
if fixtures are powered on for more than four hours per day
 Use a vacuum cleaner to remove dust from each fan filter
 In dusty environments or conditions involving the use of smoke machines, clean the
filters as follows:
• Using fingernail or small flat-blade screwdriver, remove fan filter cover by prying
under one of the two locking tabs
• Carefully remove foam fan filter from fan assembly
• Gently wash foam fan filter in a solution of mild dishwashing solution and water
• Thoroughly rinse each foam fan filter in clear water
• Pat dry or air-dry filters
• After filters are completely dry, reinstall by inserting them into fan assembly
• Reattach the filters to the fixture
N o t e : No user-serviceable parts are inside.
Fuse Capacities
All Selador Fixtures use 3AG 250V 32mm x 6mm fuses. Use the following capacity fuses
for all Selador fixtures.
Fixture Size Fuse Value
11 2 A
21 4 A
42 8 A
63 10 A