Page 39 – Eschenbach Optik Opti Verso User Manual
Page 40
OPTi Verso User Manual
Page 39
Rev B English
To turn on the semi colours in screen
magnification mode, uncheck the box
circled in red on the above image. When
you do this and press the OK button, the
OPTi image will disappear from the screen
for about 5 seconds before reappearing
with the semi-colours enabled. Refer to the
Options…Colours
section
for
more
information on using and selecting semi-
colours.
NOTE:
The image may lag when semi colours are
switched on in screen magnification mode.
If this is undesirable it is recommended to
disable them when using OPTi with screen
magnification software.
When you are running OPTi with screen
magnification in full screen mode, the semi
colours are always available.
OPTi Sounds
This version of OPTi software is able to
make sounds to indicate when it is the
active application. The purpose behind this