Eschenbach Optik Opti Verso - Manual (Page 13)

OPTi Verso User Manual
Page 12
Rev B English
If you make a change to a view you can
store it as one of the ten views (View 0 to
View 9) as follows:
Ctrl + Shift + 0 to save as view 0
Ctrl + Shift + 1 to save as view 1
and so on up to
Ctrl + Shift + 9 to save as view 9
You will be prompted to confirm that you
wish to save the current layout.
Note that you cannot store a
setting at full screen. You should
instead use Page Up to enlarge the
window to the maximum size and then
save this instead.
To recall the stored views, press Ctrl + 0
to Ctrl + 9. You will be prompted to save
any changes you made to the current view
when you change to another view.
You can use the Views Manager to look at
the views you have stored. You can access
this from the menu by pressing the Menu