Power ratings for 200 v models, Auxiliary supply – ElmoMC ExtrIQ Digital Servo Drives-Hawk User Manual
Page 66
Hawk Installation Guide
Technical Specifications
MAN-HAWIG (Ver. 1.401)
66
4.4. Power Ratings for 200 V models
Feature
Units
10/
200
17/
200
20/
200
R30/
200
Minimum supply voltage
VDC
46
Nominal supply voltage
VDC
170
Maximum supply voltage
VDC
195
Maximum auxiliary supply voltage
VDC
195
Maximum continuous power output
W
1600
2700
3200
4800
Efficiency at rated power (at nominal
conditions)
%
> 97
Maximum output voltage
97% of DC bus voltage at f=22 kHz
Amplitude sinusoidal/DC continuous
current (Ic)
A
10
17
20
30
Sinusoidal continuous RMS current limit
(Ic)
A
7
12
14.1
21.2
Peak current limit
A
2 x Ic
No peak
Weight
g (oz)
165 g (5.8 oz)
Dimensions
mm (in)
80 x 61 x 24.5 (3.15" x 2.4" x 0.965")
Digital in/Digital out/ Analog in
6/4/1
Mounting method
PCB mount
The following notes apply to all the above Power Rating models up to 100 V and 200 V.
Note on current ratings:
The current ratings of the Hawk are given in units of DC amperes
(ratings that are used for trapezoidal commutation or DC motors). The RMS (sinusoidal
commutation) value is the DC value divided by 1.41.
4.5. Auxiliary Supply
Feature
Details
Auxiliary power supply
Isolated DC source only
Auxiliary supply input voltage
12 VDC to 195 VDC
Auxiliary supply input power
7 VA