ElmoMC ExtrIQ Digital Servo Drives-Hawk - Manual (Page 30)

Hawk Installation Guide Installation
MAN-HAWIG (Ver. 1.401)
www.elmomc.com
30
3.9. Main Feedback
The Main Feedback port is used to transfer feedback data from the motor to the drive.
The Hawk can accept any one the following devices as a main feedback mechanism:
• Incremental encoder only
• Incremental encoder with digital Hall sensors
• Digital Hall sensors only
• Interpolated Analog (Sine/Cosine) encoder (option)
• Resolver (option)
• Tachometer (option)
• Potentiometer (option)
• Absolute Encoder (optional on the solo board)