ElmoMC AC Input Digital Servo Drives-Cornet - Manual (Page 21)

Harmonica and Bassoon Cable Kits Motor Power Cables
MAN-CBLKIT- (Ver. 3.4)
10-2
10.2 Motor Power Cable (CBL-MTRPWR1- 5 for Metronix
SAR, SA, SB and SC motors)
CBL-MTRPWR1 is a 24-AWG shielded cable in which each wire on the SimplIQ drive side
is connected to a pin terminal, and the wires on the motor side are connected to a 4-pole
socket. This cable is designed to connect the Harmonica or Bassoon drive to the Metronix
APM-SAR, SA, SB and SC motors.
Socket Pin No.
Color Signal Description
1 Brown & White U Motor Phase U
2 Pink & Gray V Motor Phase V
3 Blue & Red W Motor Phase W
4 Green & Yellow Earth Ground
Table 10-2: Motor Power Cable for the Harmonica and Bassoon Drives (Metronix SAR, SA, SB and
SC motors)
Figure 14: Motor Power Cable (Part No CBL-MTRPWR1- 5 , for Metronix SAR, SA, SB and SC motors)
Through November 2004, cables that were labeled CBL-MTRPWR1- 5 which were
sold individually or as part of the CBL-MLXKIT02- 5 cable kits were wired as follows:
Socket Pin No. Color Signal Description
1 Brown & White U Motor Phase U
2 Green & Yellow V Motor Phase V
3 Blue & Red W Motor Phase W
4 Pink & Gray Earth Ground
Table 10-3: Motor Power Cable (Part No. CBL-MTRPWR1- 5 , wiring plan prior to November 2004)