ECOXGEAR T2USB200: Tape 2 USB - Manual (Page 9)

2. Built-in MICROPHONE (Record to a Tape)
1. Press the MICROPHONE button and
select the ON position.
NOTE: To turn OFF the MICROPHONE function, press the MICROPHONE button so that the
button is up and the function is OFF. When the microphone is off, no sound is picked up from
microphone and no audio will be recorded to your tape or your computer.
2. Press the REC button to start recording to a tape.
NOTE: IF the tape is a Cr02 version,
select the REC Cr02 button first,
then press REC PLAY button.
When you press the REC button the PLAY ( ) button will also be pressed automatically.
At the end of the cassette tape, the cassette will stop automatically.
NOTE: Once the MICROPHONE button is pressed, audio to the player’s built-in speaker is
turned off. Thus, while the MICROPHONE function is ON, no audio can be heard
from the internal speaker. Press the MICROPHONE button again to turn the
microphone function OFF. The audio from the built-in speaker will resume when the
microphone function button is turned off.
NOTE: Always have the MIROPHONE button turned OFF when recording from your
tape to your PC. Audio can be recorded to your computer via the built-in
MIRCOPHONE. Therefore, IF the MICROPHONE function button is selected ON,
sounds from tape and microphone are both recorded when recording to your PC from
the tape.
3. Press the STOP button to stop recording to a tape.
8