ECOXGEAR T2USB200: Tape 2 USB - Manual (Page 6)

Listening to a Tape
1. Press the POWER button to switch on the unit. Use the CASSETTE / LINE IN switch on the
top panel and select the CASSETTE position.
2. Plug the RCA Cable into the PLAY OUTPUT jack at the back of the unit, be sure that the red RCA
Cable is inserted into the red jack and the white RCA Cable is inserted into the white jack. Plug the
other ends of the RCA Cable into the auxiliary input (Aux) of your home amplifier device. Be sure the
red RCA Cable is inserted into the red jack and the white RCA Cable is inserted into the white jack.
3. Press the STOP/EJ button to open the cassette door and insert a cassette tape. Gently close the
cassette compartment door.
4. Press the COUNTER RESET button to zero the counter & ready the counter to track the revolutions.
5. Press the PLAY ( ) button.
NOTE: IF the tape is a Cr02 version,
select the PLAY Cr02 button first,
then press PLAY button.
NOTE: The player with automatically stop at the end of the cassette tape.
6. Fast forward and rewind.
Press the fast forward button to advance the tape
Press the rewind button to rewind the tape.
7. Pausing the playback.
5
To pause the tape during play or recording, press the PAUSE button.
Pressing the PAUSE button again resumes tape’s play.