Eberspacher EasyStart Remote+ Operating instructions - Manual (Page 29)

VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn | 29
3 OpeRATiOn AnD seTTing/ADjusTMenT
seTTing The TiMe FORMAT
press the
or button to activate the mobile
unit. Following successful data transmission the start
display appears.
use the or button to select the symbol
in the Menu bar.
10:30 Mo.
Confirm the seTTings menu item by pressing the
button.
The seT The TiMe symbol is displayed.
use the or button to select the TiMe
FORMAT symbol.
press the button to confirm the setting.
use the or button to select the time format.
12 h
24 h
press the button to confirm the time format.
plEasE NOtE!
Do not press the button, as otherwise seT The
TiMe FORMAT appears in the display again.
After making the setting, press the button to
return to the seTTings menu item or wail until the
display lighting goes out.
fuNctiON pushbuttONs
The following activities can be executed with the but-
tons installed in the vehicle:
ƒ starting heating mode, operating time is copied
from the previous heating mode (LeD On).
ƒ switch off all active units (LeD OFF).
ƒ Teach the mobile unit, see installation instructions.