Eberspacher EasyStart Remote+ Operating instructions - Manual (Page 23)

VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn | 23
3 OpeRATiOn AnD seTTing/ADjusTMenT
prOgram prEsEt timEs
press the or button to activate the mobile
unit. Following successful data transmission the start
display appears.
use the or button to select the symbol in
the Menu bar.
Display, if no preselection is activated.
1 2 3
Display, if a preselection is activated e.g. p2.
1 2 3
Confirm the pROgRAM menu item by pressing the
button.
plEasE NOtE!
if the symbol is marked with , a or several pro-
gram memories is/are already activated.
Activated program memories are marked in the dis-
play with a .
prOgram mEmOry sEttiNgs
seLeCTing The pROgRAM MeMORy
The p1 program memory is displayed, if applicable,
use the
or button to select the next program
memory p2, p3 or p1 again.
program memory p1 display, factory setting.
1
Mo. - Fr. 21 °C
07 : 00 30 min.
program memory p2 display with programmed
preselection.
2
Mi. 21 °C
06 : 30 60 min.
press the button to confirm the selected pro-
gram memory.
ACTiVATing / DeACTiVATing The pROgRAM MeMORy
use the or button to select the “On” or “Off”
setting.
2
Off On
2
Off On
Confirm the “On” or “Off” setting with the but-
ton, the program, e.g. p2 is activated or deactivated.