Doug Fleenor Design GIZMO Manual - Manual (Page 11)

Page 11 of 11
Specifications
Input baud rate: 250 Kb/s
Input circuit: ESD protected EIA-485 transceiver (LT1785)
Input signal: 3 volts minimum, 12 volts maximum
Input connector: Male Gold plated 5 pin XLR (Neutrik D-1 series).
Pin 1 = common, Pin 2 = Data-, Pin 3 = Data+.
Cable check on pin 4 and pin 5
Output isolation: 600 Volts
Output baud rate: 250 Kb/s
Output circuit: ESD protected EIA-485 transceiver (LT1785)
Output signal: DMX512-A
Output connector: Female Gold plated 5 pin XLR (Neutrik D-1 series).
Pin 1 = common, Pin 2 = Data-, Pin 3 = Data+
Cable check on pin 4 and pin 5
User interface: 25 button keypad and two line 16 character backlit LCD display
Battery: Provided with 9 Volt NiMH rechargeable
or
User provided 9 Volt Alkaline (see “Notes On The Battery”)
Wall power supply: Input: 100 - 240VAC 0.5A Max. 50/60 Hz
Output: +15V DC 0.666A
Connector: 2.5mm type with the center conductor as positive
Power input: 15VDC 0.075A
Connector: 2.5mm type with the center conductor as positive
Color: Front black anodized, rear red clear powder coat
Size and weight: Chassis 6.75"l X 3.5"w X 1.4"h, 16 ounces
Power supply 2.2"l X 1.9"w X 1.0"h, 5 ounces
Warranty
Products manufactured by Doug Fleenor Design carry a five year parts and labor warranty against
manufacturing defects. The Gizmo battery is not covered by this warranty. It is the customer's
responsibility to return the product to Doug Fleenor Design (at the customer's expense). Doug Fleenor
Design will repair the unit and return it to the customer (at Doug Fleenor Design's expense). If a trip is
necessary to the customer's site to solve a problem, the expenses of the trip must be paid by the customer.
Note that this warranty is against Manufacturing Defects. It does not include damage due to misuse or
abuse. Most non-warranty repairs are made for a fixed $30.00 fee.