Doug Fleenor Design GIZMO Manual - Manual (Page 10)

Page 10 of 11
Setup
SETUP?
^¥ TO SCROLL
Press [ENTER] to select the SETUP mode. There are three options. Use the [Ç] and [É] keys to scroll
through the selections and the [ENTER] key to select the displayed option.
Software Version
Entering the SETUP mode first displays the Gizmo software version which is shown as the release date
for the installed software. New software is installed by replacing the socketed processor chip in the Gizmo.
Check the Doug Fleenor Design, Inc. web site at
www.dfd.com for the latest version. Contact us to make
arrangements to get your Gizmo updated.
GIZMO 2/14/06
^¥ TO SCROLL
Set Display Mode
Entering this menu allows you to select the format which the Gizmo will use to display level information.
Selecting the percent mode (the default) causes all levels to be displayed as percentages from 0 - FL.
Selecting the decimal mode causes all levels to be displayed as absolute DMX values from 0 - 255. The
percentage mode is more “human readable”, while the decimal mode allows for more precise level setting.
The decimal mode also allows the propeller heads amongst us to confuse the artists. The selected display
mode is stored in the Gizmo’s non-volatile memory so it will remember your preferred setting when the unit
is powered off and on again.
1 2 3 4
FL% 50% 25% 0%
1 2 3 4
255 128 64 0
display in percent display in decimal
Set Lite Timeout
SET LITE TIMEOUT
^¥ TO SCROLL
This feature has not yet been implemented.