Doug Fleenor Design RERUN-P - Manual (Page 12)

Page 12 of 12
EDITING SHOW PARAMETERS
(CONTINUED)
Front panel lockout
The front panel buttons on the Rerun Portable can be locked to prevent tampering with a running show. The
ability to lock out the front panel is disabled by default.
To enable or disable the ability to lock the front panel, do the following:
1. Start playing any show.
2. Pause the show at any point.
3. Press and hold the number 10 [SHOW] button. Hold the number 10 [SHOW] button for about five
seconds. While held, the remaining [SHOW LEDS] will indicate the status of other show and system
parameters. The number 4 [SHOW LED] indicates the status of the front panel lockout output option.
While continuing to hold the number 10 [SHOW] button, press the number 4 [SHOW] button to
toggle the state of the option. When the number 4 [SHOW LED] is lit, the Rerun Portable will allow
the front panel to be locked. When the number 4 [SHOW LED] is off, the Rerun Portable will not
allow the front panel to be locked. Set the front panel lockout enable option as desired.
4. Release the number 10 [SHOW] button.
5. Press the [PAUSE] button to save the new settings and to resume the show.
Note:
! The front panel lockout enable feature is a global system parameter. Although it can be accessed
from any show, there is only one front panel lockout enable state.
! By default, the front panel can not be locked.
! See the Front panel lockout section in the LOCKING THE FRONT PANEL section for operational
details.
Grand master
A grand master feature is available as a factory option. This feature allows the user to alter the overall level
output of the current show. The REWIND and FORWARD buttons are used to access this feature while the
show is running. The REWIND button raises the grand master and the FORWARD button lowers it.
Note:
! The grand master feature can only be enabled at the factory. It can not be enabled in the field.
! The grand master feature is disabled by default.
! When enabled, the grand master feature does not alter the levels of the incoming DMX512 levels.
WARRANTY
Products manufactured by Doug Fleenor Design carry a five year parts and labor warranty against
manufacturing defects. It is the customer's responsibility to return the product to Doug Fleenor Design (at the
customer's expense). Doug Fleenor Design will repair the unit and return it to the customer (at Doug Fleenor
Design's expense). If a trip is necessary to the customer's site to solve a problem, the expenses of the trip must
be paid by the customer.
Note that this warranty is against Manufacturing Defects. It does not include damage due to misuse or abuse.
Most non-warranty repairs are made for a fixed $30.00 fee.