DIGIWEIGH DWP-PC - Manual (Page 20)

7.2 PRT (PRINTER) MODE
7.2.1 Printing Current Transaction
A standard printout as will be sent through the RS232 Comport when
[PRINT]
9
is pressed. Refer to Standard Printout Sample on next page for
description.
Number of copies sent = the number of copy set in internal function F8.
Refer to 5 INITIAL SETUP for more information. If extra copies are needed,
press [PRINT] again.
7.2.2 Printing the Totalized Accumulated Result
Refer to Totalized Accumulated Printout Sample on next page for
description.
How to set up printer
[TARE] = Enter, save and return,
[PRINT] = Go next,
Presshold TARE for 5 seconds as you turn on the scale it should give you
F1 AD with the PRINT button go to F8 SERIAL then hit tare
BOUD RATE should be set to 9600 hit tare to go to SERIAL MODE this
should be set to PRT then hit tare to go to PRINT COPY this should be set
to 1, hit tare to go to STAB CONT this should be set at OFF, hit tare to go to
PRINT FROM this should be set 0D, hit tare to save and you went back to
F8 SERIAL
9
Pressing [PRINT] will not accumulate transaction to memory. Press [M+] to trigger
memory accumulation and print function simultaneously