DIGIWEIGH DWP-PC User Manual
Page 15
Tare function is used to temporarily set the instrument to zero (such as
cancelling the weight of a box or a container) in order to get the net weight
result
How to use function of the printer
Place the weight on the scale, and then key in
the price per lb(example $99), then hit the PRINT button once
the DATE, TIME, NO.,NET,GROSS,PRICE,TOTAL will display on the
receipt
then Hit "CH"(Change back$) key in the amount the
Customer gave to you(Example $100) Then hit "PRINT
and the PAYMENT & CHANGE should print on the ticket
6.4.1 Enable / Disable Repeat (Multiple) Tare
Depends on internal function setting, repeated (multiple) tare operation may
be enable (Mode 1) or disabled (Mode 2). Contact your dealer for more
information.
When repeat (multiple) tare is enabled: -
1.
the instrument will permit multiple tare operations provided that
both of the below requirements are fulfilled: -
The tare operation does not permit a reduction of the value of
the tare;
The tare effect can only be cancelled when there is no load on
the platter.
2.
tare effect can only be cancelled when container is removed and
gross weight is zero.
maximum weight that can be displayed.