DIGIWEIGH DWP-11KRW - Manual (Page 8)

Floor / Pallet Scale
- 7 -
2.2 KEY FUNCTIONS
[UNIT] Switch between weighing units.
[FUN] Select or enter the function and save the setting values of parameters.
In counting mode, press to view unit weight, counts and total weight when “F3 Key”=1.
In the accumulation mode, press to view numbers when “F3 Key”=2.
Press to enter/exit animal mode when “F3 key”=5
[MOD] Enter/exit counting mode when in weighing mode when “F3 Key”=1.
Accumulate and print when “F3 Key”=2.
Hold/release the readout when “F3 Key”=3.
Enter pre-tare value when “F3 Key”=4.
Parameter setting for animal weighing when “F3 Key”=5
[TARE] Enter fast calibration when pressed in warming up.
Tare off the container weight.
When setting parameters press to change the value.
[ZERO] Press to enter parameter setting during warming up.
Zero the readout
When setting parameters, press to move the cursor.
[ON/OFF] Turn on/off the scale.