Brother DCP-9042CDN - Manual (Page 9)

Setting Up the Machine
7
2
While pressing the green paper-guide release
lever (1), slide the paper guides to fit the paper
size. Make sure that the guides are firmly in the
slots.
3
Fan the stack of paper well to avoid paper jams
and misfeeds.
4
Put paper in the paper tray. Make sure that the
paper is flat in the tray and below the maximum
paper mark.
5
Put the paper tray firmly back into the machine.
4 Install the power cord
1
Make sure that the machine’s power switch is
off. Remove the label covering the AC power
inlet.
2
Connect the AC power cord to the machine.
3
Plug the AC power cord into an AC outlet. Turn
the power switch on.
5 Setting the LCD contrast
You can change the contrast to help the LCD look
lighter or darker.
1
Press Menu.
2
Press 1.
3
Press 6.
4
Press to increase the contrast.
—OR—
Press
to decrease the contrast.
Press OK.
5
Press Stop/Exit.
(1)