Brother DCP-9042CDN - Manual (Page 8)

Setting Up the Machine
6
STEP 1
2 Installing the toner
cartridges
1
Unpack the toner cartridges and gently shake
each toner cartridge from side to side 5 to 6
times.
2
Pull off the protective cover.
3
Hold the handle of the toner cartridge and slide
it into the drum unit. Make sure that you match
the toner cartridge colour to the same colour
label on the drum unit, and make sure that you
fold down the toner cartridge handle (1) once
the toner cartridge is in place.
1 C — Cyan
2 M — Magenta
3 Y — Yellow
4 K — Black
4
Repeat steps 1 through 3 for the remaining
toner cartridges.
5
Put the drum unit back into the machine.
6
Close the front cover of the machine.
3 Load paper in the paper tray
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.
1
Pull the paper tray completely out of the
machine.
(1)
(1)
1
2
3
4