Brother DCP-9042CDN - Manual (Page 5)

Getting Started
3
„ To ensure safe operation the supplied plug must be inserted only into a standard power outlet that is properly
grounded through the standard electrical wiring. Non grounded equipment may cause an electrical shock
hazard, and may cause excessive electrical noise radiation.
„ The interface cable is not a standard accessory. Please purchase the appropriate interface cable for the
interface you intend to use (USB or Network).
„ DO NOT connect the interface cable at this time. Connecting the interface cable is done during the software
installation process.
„ USB interface cable
Please make sure you use a USB 2.0 interface cable that is no longer than 2 metres. When you use a USB
cable, make sure you connect it to the USB port of your computer and not to a USB port on a keyboard or non-
powered USB hub.
„ Network cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet
Network.