Tally dascom 1125, Printer failures, Error indications on leds – Dascom 1125 User Guide User Manual
Page 57

Tally Dascom 1125
43
The printer is on but it will not
print.
• Make sure that the Online indicator is lit.
• If you use the interface cable, make sure it is securely
connected to both the printer and the computer.
• Make sure paper is loaded.
• Run the printer Status Page. If printing executes normally, the
problem is caused by: the interface, the computer, incorrect
printer settings, or incorrect software settings.
• Make sure that the printer driver selected in your software is the
same as the emulation selected on the printer.
Paper select lever error
If paper is loaded and the paper select lever is moved to the
incorrect position, the printer turns offline, and the buzzer sounds
continuously. Switch the paper select lever back to its correct
position.
Printer Failures
A user cannot generally resolve a problem involving defective printer hardware. Power off and on again the
printer to recover any fatal error. If the problem cannot be resolved, contact your dealer or service partner.
Error Indications on LEDs
Error Description
Operation
Status
Paper
Out LED
Online
LED
Tear Off
LED
Buzzer
Sound
Paper out
Normal
Flash
Off
No change
Once
Paper jammed
Suspend
Flash
Off
Flash
Once
Friction feed /Tractor feed
Suspend
On
Off
Flash
Continuously
Print head hot
Normal
On
Flash
No change
--
Carriage initial position
Stop Off Off Flash Once
Memory
Stop
Off
Off
Flash
--
EEPROM Normal
Off
Flash
No
change
Once
CMOS chip
Stop
Off
Flash
Flash
--