Tally dascom 1125 – Dascom 1125 User Guide User Manual

Page 51

Tally Dascom 1125

Function of keys:

【Tear Off】key: Decrease 0.5mm
【Load/Eject】key: Increase 0.5mm

5. Press 【LF/FF】 key, printer will print “Save settings？Yes”. Press 【Load/Eject】 key to choose Yes

or No，then press 【LF/FF】 key to confirm selection and exit “Adjust Page Margins” mode by

pressing 【Online】. The print head moves to the left side and the printer beeps twice, then the print

head moves to the middle position.

Adjust Tear-Off Position Procedure:

1. Enter the Adjust Page Margins function by holding down the【Load/Eject】and【Online】keys while

powering up until the printer beeps twice.

2. Load fanfold paper.

3. The printer will print as below:

Adjust Page Margins:

【LF/FF】=OK 【Tear/Off】= Back 【Load/Eject】= Next 【Online】= Exit

Current Setting: Adjust Fanfold Top Margin

4. Press【Load/Eject】key until the current setting is “Adjust Tear-Off Position”. Press【LF/FF】key to

confirm selection. The printer will print as follows:

Procedure：

Install fanfold paper to tractors