Dascom 1125 User Guide - Manual (Page 25)

Tally Dascom 1125
11
There are 2 paper feed modes: friction feed and tractor feed.
Friction Feed Handling
1. Move the paper-feed lever forward to “ ” for friction feed mode.
2. Adjust the print gap lever if necessary.
3. Raise the single sheet feeder until it locks into its mounting. Align the left paper guide with the mark on the
left of the single sheet feeder. Adjust the right paper guide to the width of the paper used.
4. Insert a sheet of paper. Make sure that the bottom edge of the paper engages snugly with the platen.
5. The paper should advance automatically to the print position. The printer is now ready to print in the online
state.