beautypg.com

Dascom T2280+ Web Panel Description - ETH-INT User Manual

Page 4

background image

© DASCOM Europe GmbH Version 1.0

Page 4 of 25

2. Static assignment using the operator panel:

• Press , then

.
• Press until the I/O selection appears. Select .
• Press until the ETH-INT selection appears. Select , then
• Enter the value for Octet 1by pressing . Use the forward and backward

arrows to increment/decrement the number. When finished with each entry press
which will set the currently displayed value. To exit out without changing the value press
. Enter the Octet 2 value in the same way, pressing . To get to Octet
3 and Octet 4, select and then select and .

• Enter the default Gateway and Subnet mask in the same way. is available

from the screen you are returned to. Press to select .

• Enter the IP address get method under the selection . Select .

3. BOOTP IP address assignment:

• Press , then

.
• Press until the I/O selection appears. Select .
• Press until the ETH-INT selection appears. Select .
• Press until the IP Get M selection appears. Select Select
• Obtain the Ethernet MAC address by printing the “Current Settings” configuration page.

Turn off printer.

• Configure your BOOTP server with desired IP address and MAC address.
• Turn on printer.
• Verify that the printer network interface received an IP address by printing the “Current

Settings” configuration page or in the operator panel menu.

This manual is related to the following products:
See also other documents in the category Dascom Printers: