Dascom T2280+ Web Panel Description - ETH-INT - Manual (Page 25)

© DASCOM Europe GmbH Version 1.0 Page 25 of 25
The Virtual Control Panel will be the active window. This window will show the current error state
and display the contents of the printer’s LCD display. Selecting the buttons on the display will
behave the same as if selecting the buttons on the printer itself. The LCD information on the
virtual panel refreshes every 15 seconds. The physical panel, virtual panel and Online Status in
the Printer Status are all active, so there may be some synchronization delay issues if a user
presses a button on the physical printer or the Online Status in the Printer Status area. The
Panel Lock feature affects the virtual panel in the same way as the physical panel. The only
functional difference between the physical and virtual panel is that in the virtual panel, the LF/FF
option will always do a FF.
To close the virtual panel, click on the red X in the upper right of the window.
Note:
This feature needs the browser to allow pop ups.