Dascom 7206 Cutter Installation Guide - Manual (Page 9)

– 9 –
SAFETY SIGNS
that must be strictly observed!
To prevent personal injury or property damage, the following must be
strictly observed.
The degree of possible injury and damage due to incorrect use or
improperly following instructions specified is described below.
WARNING
CAUTION
This is a mark to call attention to the reader.
WARNING
Do not perform the following. If ignored, these may cause
damage to the auto-cutter, breakdown, overheating, smoke, fire
or electric shock. If the auto-cutter is damaged or breaks down,
turn off the power to the printer and remove the power cord from
the outlet and then consult your supplier.
Do not open the auto-cutter during operation.
The cutting blade can be very dangerous. Also, this can cause
damage.
Prevent foreign matter from entering small openings
of the auto-cutter
Inserting your finger or other foreign matter in the small
openings of the auto-cutter can be extremely dangerous and
can damage the cutter.
The user should never install or remove the auto
cutter.
Indicates a situation which, if not
observed and handled properly,
could result in death or serious
injury.
Indicates a situation which, if not
observed and handled properly,
could result in personal injury or
property damage.