Dascom 7206 Cutter Installation Guide - Manual (Page 10)

– 10 –
CAUTION
Avoid the following conditions to ensure proper
operation of the auto-cutter.
The cutting blade can be very dangerous. Also, this can
cause damage.
Room temperature is less than 5
°C or more than 40°C.
Humidity is less than 30% or more than 80%.
Dusty
Direct sunlight
Chemicals
Vibrations or impacts
When cutting media (paper)
Do not operate auto-cutter without loading paper. This can
cause damage to the cutter.
Use the standard media (paper). Otherwise, problems such
as paper jams may occur.
Remove any dust or particles from the paper guide and path
periodically.
When auto-cutter is cleaned, turn off the power to the
printer and remove the power cord from the outlet
beforehand.
Clean the main body of the auto-cutter with a soft cloth
that is soaked in a thinned neutral detergent. Do not use
volatile solvent such as benzene and thinner, which can
cause discoloration.
When the cutter blade becomes dirty, contact your
supplier or a service representative.