Dascom 7206 Cutter Installation Guide - Manual (Page 16)

– 16 –
7. Auto cut-length detection
If media with a cut length shorter than the minimum cut length of 25.4mm
(1.0 in) is used, the cut media may remain in the cutter unit and cause paper
jams. To prevent this, when the printer detects a cut length shorter than the
minimum, it feeds the media without operating the cutter. Therefore, use a
cut length of 25.4mm (1.0 in) or longer when setting the media cut length.
Note Media is fed and not cut when its media cut length is 12.7mm (0.5 in) or
less. However, if the total length of several labels (for example, two or
more) on one label sheet is more than 12.7mm (0.5 in), the media can be
cut in intervals of multiple labels (for example, every two or more labels).
Cutter
Lc > 25.4mm(1")
Cut length Lc
Printhead
Minimum cut length:
25.4mm(1")
Cut prohibition
Lc = 10 mm (0.39")
Lc Lc
12.7 mm (0.5")
20 mm (0.78")
Cut