Dascom 7106 User Guide - Manual (Page 24)

2
Printer Operation
24
7. Align the media with the left fixed media guide, align the right
movable media guide with the media width, and lower the sensor
arm.
8. Lower and lock the head unit. Align it with the width of the
media that has been set, then set the media width and media
thickness adjustment dials.
See “Chapter 3 Printer Adjustments”.
9. With the power switched on, push the FEED key to feed the
media.
It will halt at the next print start position.
Media Thickness Adjustment
(p.42)
Media Width Adjustment
(p.43)
Setting the Media
Fixed media guide
Sensor arm
Movable media
guide
Media width adjustment
Media thickness adjustment
Head unit