beautypg.com

Operation – Danuser 2312 AugerBucket User Manual

Page 10

background image

10

STEP 1: With the Auger Bucket stationary, add dry material(s) to the discharge chute end

of the bucket and then the liquid (water) to the motor end of the bucket.

STEP 2: Run the auger in reverse. This will draw the dry material(s) into the liquid and up

the motor end of the bucket. The mixture will roll back into the mixing material.

STEP 3: Continue to add more dry material(s) and liquid to get the quantity and mix you

require.

STEP 4: When mixing is complete, position the vehicle so the discharge chute is directly

over the forms or desired location. Run the auger in the forward direction to

discharge the mixture.

Motor stalling could occur if the mixture is too dry.

NOTE

Before you operate the attachment, check over pins and

connections to be sure all are securely in place. Make sure

the Auger Bucket is securely latched to the skid-steer.

Operation

Mixing Auger Bucket

Failure to follow these mixing instructions will result in excessive wear of the

rubber flighting and will void manufacturer’s warranty.

NOTE

D A N G E R

Keep clear of auger while in operation. Never position

the material by hand or with any tool when the auger is

rotating.

Move the vehicle slowly when the attachment is raised, and

carry the load low. A heavy load can cause instability of

the vehicle. Use extreme care during travel. Slow down

on turns and watch out for bumps. Use all safety devices,

including a seat belt, as recommended in the vehicle

operator’s manual.

w A R N i N G

Keep hands, feet, hair,

jewelry, and clothing away

from all moving and/or

rotating parts.

D A N G E R

The Auger Bucket is

designed to be operated

from the vehicle seat.

Keep bystanders away

from the work area. Do

not operate with another

person in contact with any

part of the Auger Bucket.

D A N G E R

w A R N i N G

Personal protection

equipment including

hard hat, safety glasses,

safety shoes, and gloves

are recommended during

assembly, installation,

operation, maintenance,

service, removal, or

movement of the Auger

Bucket.

D A N G E R

Never allow anyone

under the attachment at

any time.

D A N G E R

This manual is related to the following products: