Brother HL 3070CW - Manual (Page 62)

Wireless configuration for Windows ® using the Brother automatic installer application (For HL-3070CW)
52
4
o
The wizard will search for wireless networks available from your machine. Choose the Ad-hoc network
you wish to associate the machine with, and then click Next.
Note
• If the list is blank, check if the machine is within range for wireless communication. Then, click Refresh.
• If your target Ad-hoc network does not appear on the list, you can manually add it by clicking the Add
button. Check This is an Ad-hoc network and there is no access point., and then enter the Name
(SSID) and the Channel number, and then click Next.
p If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to r.