Brother HL 3070CW User Manual

Page 44

Wireless configuration for Windows

using the Brother automatic installer application (For HL-3070CW)

Choose the machine you wish to configure, and click Next. If the list is blank, check if the access point

and the machine are powered on, and then click Refresh.

Note

• The default node name is “BRNxxxxxxxxxxxx”.
• You can find your printer’s MAC Address (Ethernet Address) and the IP Address by printing out the

Network Configuration page. See Printing the Network Configuration page on page 123.

The wizard will search for wireless networks available from your machine. Choose the access point you

wish to associate the machine with, and then click Next.

Note

• “SETUP” is the default SSID of the machine. Do not choose this SSID.
• If the list is blank, check that the access point has power and is broadcasting the SSID, and then see if

the machine and the access point are within range for wireless communication. Then, click Refresh.