Initializing tpm, Dinitializing tpm – chiliGREEN 12 M72xR User Manual
Page 231
Windows XP Information
TPM Security Chip D - 51
D
Initializing TPM
On the first run of the program you will need to initialize the TPM.
1.
Run the application from the Security Manager shortcut on the desktop, or from the
TPM Secure Tools item in the Start > Programs/All Programs menu.
2.
Click Next.
3.
Type a TPM owner password, and then retype to confirm the password.
4.
Click Next to create a recovery token (see sidebar).
5.
Click Next and create a password reset token file if required.
6.
Click Next and specify a location for the emergency recovery data path (a root path
to restore user keys if you need to reinstall the OS).
7.
Click Next > Next to begin the Initialization process.
8.
Click Finish to begin the user initialization.
9.
Click Next, and type a TPM user password, and then retype to confirm the
password.
10. Click Next and create a password reset secret file if required (click in the tickbox).
11. Click Next > Next to begin the user Initialization process.
12. Click Finish (it is recommended that you use the Backup and Restore module to
make a backup).
13. Enter the user password and click Logon.
14. For further details on using the Security Manager see
Password Warning
Do not lose the pass-
word. If you do so you
will be unable to make
administrative changes
unless you clear the
TPM. This could then re-
sult in data loss.
Recovery Token
Note the location of the
emergency recovery to-
ken. It is recommended
that you save the file to
removable media such
as a USB Flash drive (or
backup using the tool
provided - see page