Carbolite Work Tube End Seals User Manual
Page 3
1
MS76 – 1.00
1.0 I
NTRODUCTION
1.1 Models covered by this manual
This manual covers the Carbolite twin clamp end seal.
Key changes over the existing gas tight and vacuum tight end seal options are that now one design
covers the options of gas and vacuum sealing.
Ultimate vacuum levels have also been increased to 10
-6mbar
1.2 Warning Symbols
DANGER of electrical shock– read any warning printed by this symbol.
DANGER – hot surface. Read any warning printed by this symbol.
WARNING: all surfaces of a furnace may be hot.
DANGER – read any warning printed by this symbol.
See also other documents in the category Carbolite Kiln:
- Peak Series (16 pages)
- AX30 (12 pages)
- GP Series (16 pages)
- GPC Series (16 pages)
- LHT Series (16 pages)
- HRF (MF05) (16 pages)
- HRF 7/45 (12 pages)
- ABA 7/35B (72 pages)
- TLD Series (12 pages)
- CR Series (16 pages)
- MTT 12/38/850 (16 pages)
- CF 15 - CF 60 (20 pages)
- PTC 12/20/150 (16 pages)
- CFM Series (16 pages)
- AAF Series (16 pages)
- SNF Series (12 pages)
- HZS Series (16 pages)
- MTF Series (16 pages)
- TZF Series (16 pages)
- GHA Series (24 pages)
- TZF Series (16 pages)
- STF Series (20 pages)
- EHA Series (28 pages)
- CWF Series (16 pages)
- ABF 8/28 (16 pages)
- VCF Series (16 pages)
- ELF Series (16 pages)
- HTR 11/75 (16 pages)
- HST Series (16 pages)
- STF Series (20 pages)
- VST 17/-- (16 pages)
- BLF 17/3 (16 pages)
- RHF Series (17 pages)
- HTF 17 (20 pages)
- RHF Series 3 litre - 35 litre (16 pages)
- CDF 15/1b (16 pages)
- CAF 16/38 (16 pages)
- CAF DIGITAL IMAGING (52 pages)