Advanced - slicing, Set the slice size for the selected array(s) – CalDigit RAIDShield User Manual

Page 25

Text mode
Original mode

Advanced - Slicing:

Hard drive slicing, partitions the drives of an array so that it appears as a separate volume without reducing the speed.
(This process must be performing in the order at slice 0, slice 1, and slice 2…. An array can have maximum 8 slices)

NOTE: if you sliced the array, you will need to assign the LUN map for the sliced arrays. (See next section.)

1. To perform slicing for the RAID array, please select an existing array to slice.

2. Set the slice size for the selected array(s)

3. Check

the

Confirm box, and Click the OK to complete the process.