C.B.S. Scientific DCX-800 - Manual (Page 11)

11 www.cbsscientific.com
matching
colors
3.3 Removing the Gel
1. Turn the power supply off and disconnect
the leads from the power supply. Remove
the safety cover from the unit, by placing
thumbs on white posts next to red & black
connectors, then pushing down while pulling
up with fingers under lid as shown in figure
9.
Do not remove safety cover by pulling up
on leads!
2. Pull up on gel door latches, and open gel
door. Remove gel sandwich from Cassette
Assembly. Stain and fix according to your
preferred method.
9