C.B.S. Scientific DTSK-2401-220 - Manual (Page 8)

8
www.cbsscientific.com
SECTION 3
Instructions for Use
3.1 Unit Set-up and Unpacking Instructions
1. Unpack lower reservoir and place on level surface in an approved location.
2. WARNING: Do NOT turn on Heater/Stirrer until tank has been filled with buffer. The MINIMUM buffer
volume for heating is 23 liters. Turning Heater/Stirrer on with less than 23 liters of buffer will damage the
heating coil, and void warranty. If running two dual cassettes, the buffer volume is 24 liters.
3. Connect cooling coil to chiller using tubing adapters and 1/4th I.D. tubing (tubing is not supplied).
Fig. 3-1
heater/stirrer
cooling coil inlet
and outlet