Bear Archery Compound Bow 2004 - Manual (Page 29)

29
Place an arrow on the bow-
string. Inspect for adequate fletch
clearance. If additional fletch
clearance is required, adjust
the cable guard as needed, or
reduce fletching size.
At this same point, adjust
arrow fletch position to corre-
spond with the configuration of
your arrow rest in order to ensure
clean passage through or past
that arrow rest. Such adjust-
ments are done by breaking
loose and rotating, or replacing
altogether each arrow’s inexpen-
sive nock and carefully position-
ing the new nock to provide prop-
er fletch clearance through the
arrow rest. Your archery dealer
can show you how this is easily
accomplished or can provide this
service for you.
INSTALL ALL
ACCESSORIES
Before basic tuning, install all
additional accessories - sights,
bowquivers, silencers, peep
sights, etc. Each of these items
can affect bow tuning results, it
added at a later date.
A mild thread-locker (LokTite)
compound can be used to pre-
vent loosening of screw-mounted
accessories such as sights,
arrow rests and bowquivers.
INITIAL
BOW
SETUP