Bear Archery Compound Bow 2004 - Manual (Page 10)

BOW ADJUSTMENTS
Draw Weight Adjustment
Escalade Sports bows have a 10-15 pound peak
weight adjustment range. The weight range is printed on
the sticker on the lower limb. If your bow is equipped
with limb bolt lock downs, make sure these brass-tipped
set screws are loosened 4-5 turns before making any
weight adjustments.
Using a 3/16” hex wrench, turn the limb bolts clock-
wise to increase peak weight and counter-clockwise to
reduce peak weight. Bow weight will increase or decrease
approximately two to four pounds per turn. Do not turn
one limb bolt more than two turns ahead of the other.
After making weight adjustments, use a bow scale to
check peak weight and a bow square to check the tiller.
(Does not apply to OneCams)
After all tuning adjustments have been made, engage
the limb bolt lockdown set screws. Screws should be
snug against the limb bolts. (Do not exceed 50 inch-
pounds of torque.)
10