Bear Archery Compound Bow 2004 - Manual (Page 23)

23
Machine Lite Wheels are
equipped with a bi-draw length
adjustment system. Draw length
changes are made by reposition-
ing the bowstring, as it comes out
of the wheel, into one of two dif-
ferent slots.
To change draw length, it is
first necessary to remove ten-
sion from the harness system of
the bow by relaxing the bow in a
bow press. A bow press must be
used.
Under no circumstances
can this relaxing of the har-
ness system be accomplished
by simply backing out limb
bolts.
With the bow relaxed the
bowstring can then be reposi-
tioned to the desired string slot.
The “S” slot (see diagram) short-
ens the draw length. The “L” slot
lengthens the draw length.
For the “middle” draw length,
place string in “S” slot on one
wheel and the “L” slot on the
other wheel. Such bi-draw length
adjustments will affect the bow’s
draw weight.
A shorter adjusted draw
length will decrease draw weight.
A longer adjusted draw length will
increase draw weight.
ADJUSTING
DRAW
LENGTH
MachLite
Energy Wheel