Bear Archery Compound Bow 2004 - Manual (Page 15)

ADJUSTING
DRAW
LENGTH
Perimeter
Weighted
OneCam II
15
Perimeter Weighted
OneCams have a modular draw
length adjustment. Draw length
changes are made by simply
changing modules. Accessory
modules are available from your
dealers in one-inch draw length
increments. Each module is num-
bered, with #1 being the longest
draw length module and #8 being
the shortest.
To change modules remove
the socket head screws from
the present module, remove
that module and replace with a
new module. Such module draw
length adjustment will not affect
draw weight.
Additional, fine draw length
(and string stretch) adjustments
of up to 1/2 inch can be made
by repositioning the adjustable
bowstring mounting post near the
center of the cam.
To make such adjustments, it
is first necessary to remove ten-
sion from the harness system
of the bow by relaxing the bow
in a bow press.
A fixed or por-
table bow press must be used.
Under not circumstances can
this relaxing of the harness
system be accomplished by
simply backing out limb bolts.