Bear Archery Compound Bow 2004 - Manual (Page 22)

22
ActionCams are equipped
with a modular draw length
adjustment system. Draw length
changes of plus or minus 1 inch
are made by simply changing
modules on both the top and bot-
tom cam. A bow press may be
needed in some instances.
When changing modules be
sure that the module numbers
are the same on top and bottom.
There are two types of mod-
ules available for the ActionCam,
wheel modules and cam modules.
Wheel modules are desig-
nated W1*, W2*, and W3*. W1*
produces the longest draw length
and W3* produces the shortest.
Your bow was shipped from the
factory with the W2*, or middle,
module installed.
Cam modules are designated
65C1*, 65C2*, 65C3* and follow
the same rules.
To change modules remove
the screw from the present mod-
ule, remove that module and
replace with the new module.
Such modular draw length adjust-
ment will not affect draw weight.
ADJUSTING
DRAW
LENGTH
ActionCam