BASELINE Lift BL211CF - Manual (Page 6)

6
ahead for this possibility to insure continued safety and refer to the vehicle manufacturer’s
service manual for recommended procedures.
8. Always keep the lift area free of obstructions and debris. Clean up grease and oil spills
immediately.
9. Never raise a vehicle with passengers inside. Before lowering a vehicle, check the lift and
lift area and remove all obstructions. Before removing vehicle from the lift or lift area,
position arms to the drive through position and confirm an unobstructed exit.
10.Do not perform any maintenance or installation of any components without first
ensuring that electrical power has been disconnected at the source or panel and
cannot be re-energized until all maintenance and/or installation procedures are
completed (ANSI 244.1)
SAVE THIS INSTRUCTION