Aquascape AquaBlox (29492) - Manual (Page 6)

6
Place the filter into their proper location.
It is recommended using a second layer of geotextile within the lined
storage basin to wrap around the bottom and sides of the AquaBlox ® . This
is a precautionary step that helps protect the liner. Note: All RainXchange ®
Water Storage Kits include enough geotextile for both the inner and outer
geotextile installation. Lay the geotextile into the lined basin before
installing the AquaBlox ® . The geotextile does not need to be wrapped over
the top of the AquaBlox ® , just the bottom and sides.
Step 6: Install Optional Inner Geotextile
Step 7: Install Pondless ® Waterfall Vault or Snorkel ™ /Centipede ™
Pondless ® Waterfall Vault
Snorkel ™ Vault and Centipede ™
Note: If using the Snorkel ™ /Centipede ™ small cobbles will need to be
backfilled around the excess excavated perimeter of the filter in order
to provide a sufficient base for the AquaBlox ® to sit on.