Aquascape AquaBlox (29492) - Manual (Page 5)

5
The base of the excavation should be smooth soil, flat and free of lumps and
debris. Check the size and depth of the excavation by placing the AquaBlox ®
into the excavated area. There should be approximately 6” between the
AquaBlox ® and the soil. Add compactable material such as sand, if existing
soil conditions do not meet requirements listed above. The compactable
material should be spread to a 4” minimum depth and compacted.
Lay the geotextile into the excavation covering the bottom and sides.
Multiple sections of geotextile can be overlapped to accomplish
complete coverage.
Lay the liner into the excavation and position to cover entire storage basin.
Do not trim the excess liner material until later in the project.
Step 3: Prepare Base
Step 4: Install Outer Geotextile
Step 5: Install Liner