APG PG5 user manual - Manual (Page 25)

Rev. A1, 3/10 PG5
25
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Firmware Release Notes (continued)
PG5v106.hex created 6/19/2009
-> Renamed the SETUP options displayed for bargraph and analog output setup.
-> Made Max reading not reset using shortcut only allowed in MENU Reset
-> By pressing S while not in Menu the max, then min values are displayed
-> Added Decimal Place while setting the bargraph to the psi equivalent.
-> Added Decimal Place for Analog Output Set points
-> Renamed SETUP to ADVSET in Menu
-> When changing range the value then overwrites the default multiplier for field calibration
PG5v107.hex created 8/12/09
-> If Tare is enabled and not in the menu the Z button will rezero the pressure reading
-> Added Units of Measure TONS for customer
PG5v108.hex created 11/15/09
-> Fixed Bar Graph when recalibrating gauge using the range function in the menu.
-> Fixed Glitch with Updating Range and re-zeroing gauge in Mode 000.
PG5v109.hex created 12/11/09
-> Fixed Glitch with entering mode 2 and returning to mode 3 for special calibration units which changed the units of
measure.
-> Fixed Hi and Low resolution glitch with different units of measure.