Anchor NAVI-TRAC LITE 30 WIDE - Manual (Page 4)

4
UPRIGHT 8’ (U-8)
(SEE PART LISTS ON PG #5 AND APPENDICES 1 AND 2)
EAVE WELDMENT
(EW)
GABLED END
WELDMENT “L” (GWL)
GABLED END
WELDMENT “R”
(GWR)
CORNER WELDMENT
(CW)
RIDGE WELDMENT (RW)
(NOTE: FOR GABLED ENDS, THE
BRACKET HARDWARE CAN BE
REMOVED FROM ONE SIDE, IF
DESIRED.)
NOTE: RIDGE BRACE
HOLE OUTLINED IN WHITE
GABLED END RAFTER
FITTINGS (LEFT &
RIGHT) W/ BOLT & NUT
GFL GFR
TENSION LOCK
PIN (TP)
GABLED END RIDGE BRACE (GRB) CORRECT MOUNTING
HOLES CIRCLED IN WHITE
WEB RATCHET (WR)
LONG LIFTING BAR W/ CRADLE
SHORT LIFTING BAR W/ CRADLE
DROP CLOTH
WHEELED GUIDE BRACKETS
WHEELED PANEL GUIDES
INSTALLATION SAFETY GUYS
FABRIC PULL ROPES
X-CABLING
NAVLTCS-BAY15-U8 NAVLTCS-BAY15-U9 NAVLT-BAY15
RIDGE BRACE (RB)
NAVLTCS-BAY15-U10
“U” BRACKET END PROFILE WRAPS
AROUND BEAM (ON BOTH SIDES)
“L” BRACKET END PROFILE WRAPS
AROUND BEAM (ON INSIDE SURFACE ONLY)
PUSH POLE ASSEMBLY
FABRIC END FITTING
(FOR PUSH POLE)
BASEPLATE
HINGED (BH)
BASEPLATE, GBL-
END, ADJ
(BAG)
BASEPLATE
ADJ
(BA)
BASEPLATE, GBL-
END, HINGED
(BHG)
42”
STAKE
2-HOLED PLATES for
HIP & GBL UNITS
4-HOLED PLATES FOR CS
30’ NAVI-TRAC LT COMPONENT ILLUSTRATIONS
30”
STAKE
(1) REQ’D PER
BASE PLATE
(1) REQ’D PER
GUY
GABLED END WING EAVE - 10’ (EW-10)
GABLED END MID EAVE - 10’ (EE-10)
GABLED END UPRIGHT W/ TOP FITTING (GU)
EAVE, 15’ (E-15) 14’-5”
RIDGE, 15’ W/ HOOKS (RG-15) 14’-9’
RAFTER, 30’ (R-30) 16’-2”
HIP, 30’ W/ HOOKS (H-30) 21’-8”
RAFTER, 30’ W/ HOOKS (RH-30) 16’-4 1/2”
PURLIN - 15’ (P-15)